Wireless remote contolled volume control for stereo unit.

Post Whatever Else You Enjoy Building

Wireless remote contolled volume control for stereo unit.

Postby Robbo on Mon Jun 26, 2017 2:46 am

For some time now, I have been bugged by having to get up and attend the stereo unit to adjust the volume or mute it. All of my entertainment devices are channelled through the stereo unit. The TV, PVR/CD/DVD and streaming video services etc. are no problem as I can use the appropriate remote controls. It's when I am using the 'dual auto reversing cassette player', FM radio or turntable that I need a remote control. Going through my many boxes of components and recovered items from various defunct bits of equipment, I came accross a hi-torque 12 volt DC motor that had a worm gear driving a cam to operate a limit switch and another cam to throw a dead locking bolt for an experimental door dead lock. The cam drive was too fast for the use I intended it for and soon found running it on 2.5 volts DC was just right and still with sufficient torque to drive a dual potentiometer. The cams were not suitable, as they were set to operate at 90 degrees. Removing them, cutting down and filing, soon overcame the issue to operate at 170 degrees and adding another limit switch, fixed the issue. Next I had to modify the stereo unit by cutting the printed circuit tracks connecting the unit's dual volume control potentiometer and wiring them to a 'change-over' relay so that when the relay is in its quiescent state the stereo unit's volume control is in circuit. When energised, the relay switches the stereo unit's VC OUT of circuit and the external remote volume control IN.
A red LED shows when the remote unit is in control, a yellow LED indicates when volume is being increased and a green LED when volume is being decreased.

Trusting that some of you model enthusiasts will find interesting.

http://media.fotki.com/1_p,rtfkdfskqwwg ... Cam-vi.jpg
The 170 degree cam and hi volume limit switch.

http://media.fotki.com/1_p,rtfkdfskwksw ... Cam-vi.jpg

The low volume cam & limit switch.

http://media.fotki.com/1_p,rtfkdfsksrkb ... irc-vi.jpg

The completed wired motor and reversing relay assembly with the 12v to 2.5v motor regulator circuit board.

http://media.fotki.com/1_p,rtfkdfskdssk ... bly-vi.jpg

The completed assembly with the motor, dual potentiometer, 2.5v regulator board and 315mHz remote control wireless receiver.

http://media.fotki.com/1_p,rtfkdfskdgbf ... rol-vi.jpg

The compact 4 CH remote control transmitter.

http://media.fotki.com/1_p,rtfbwtgktgwr ... it_-vi.jpg

The change-over relay in the stereo unit.

http://media.fotki.com/1_p,rtfkdfrqskrr ... nit-vi.jpg

The completed unit sits on the stereo unit. The red LED was too bright, hence the tape strip. Will modify the circuit later.
If it's not broken, then don't try to fix it. If it is broken then only one tool and aids are required: A hammer if it's tight and Blu-Tack if it's loose.
User avatar
Robbo
Lieutenant
Lieutenant
 
Posts: 386
Joined: Thu Nov 13, 2008 9:15 pm
Location: Fairview Park South Australia, Australia.


Re: Wireless remote contolled volume control for stereo unit

Postby chariots of fire on Thu Jun 29, 2017 9:43 am

As they used to say back in the '70's........."Far out,man...Far out! :idea: ;)
Charlie Rowley
(Chariots of Fire)
User avatar
chariots of fire
I Live At The Scale Firehouse
 
Posts: 3074
Joined: Sat Jan 26, 2008 8:55 am
Location: West Wareham, MA



Return to Anything Else You Build

Who is online

Users browsing this forum: No registered users and 2 guests